[HCDX] MFJ 1025-6 and mod revert

[Luca <bottoluca@xxxxxxxxx>]

I've also experimented the 'modification' on my 1026 - suggested years ago
as a good one for "serious MW DXing" (!?) on a local technical monthly
journal - and the result was the *same*! Of course I've immediately
re-solded the components previously removed too.

Luca

> Hello 
> 
> I am using the 1025 and several years ago after reading a mesage i
> thionk in this list  i removed one resistor on the RF input for better
> usage on the MW band
> However  the 1025 is now overloading  and have to revert it back to its
> original design . But all older mesages from one year ago and before
> have been deleted  due to the servicemen's carelessness
> What is the resistor( number and resistance) ?
> ------
> Please do not send mesages above 400 kB
> Zacharias Liangas , Thessaloniki Greece
> greekdx @ otenet dot gr  ---  www.geocities.com/zliangas
> Pesawat penerima: ICOM R75 , Lowe HF150 , Degen 1102,1103,108,
> Tecsun PL200, Chibo c300/c979, Yupi 7000
> Antenna: 16m hor, 2x16 m V invert, 1m australian loop 

---[Start Commercial]---------------------

World Radio TV Handbook 2005 is out. 
Order yours from http://www.amazon.com/exec/obidos/ASIN/0823077942/hardcoredxcom

---[End Commercial]-----------------------
________________________________________
Hard-Core-DX mailing list
Hard-Core-DX@xxxxxxxxxxxxxxxx
http://dallas.hard-core-dx.com/mailman/listinfo/hard-core-dx
http://www.hard-core-dx.com/
_______________________________________________

THE INFORMATION IN THIS ARTICLE IS FREE. It may be copied, distributed
and/or modified under the conditions set down in the Design Science License
published by Michael Stutz at http://dsl.org/copyleft/dsl.txt