[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [HCDX] Logs for Al Muick
Hi Glenn,
Yes, you are absolutely correct, Sir! My freqs for Israel and Korea are 5
kHz off. Apologies to all, and I have no excuse save lack of sleep and I
ran out of coffee.
Thanks for bringing this to my attention Glenn, and for the Israel factoid.
73 to all
Al
-----Original Message-----
From: Glenn Hauser [mailto:wghauser@xxxxxxxxx]
Sent: Thursday, November 20, 2008 10:10 AM
To: hard-core-dx@xxxxxxxxxxxxxxxx; Albert Muick
Subject: Re: [HCDX] Logs for Al Muick
Hi Al,
Israel stayed on SW with Persian only. This is scheduled on 9985.
V of Korea in Arabic at same time is scheduled on 9990, so it looks like
your frequencies are 5 kHz off here. Could that be? 73, Glenn Hauser
--- On Wed, 11/19/08, Albert Muick
<radioresearch_field_operations@xxxxxxxxx> wrote:
> From: Albert Muick <radioresearch_field_operations@xxxxxxxxx>
> Subject: [HCDX] Logs for Al Muick
> To: hard-core-dx@xxxxxxxxxxxxxxxx
> Date: Wednesday, November 19, 2008, 7:45 PM
> QTH: Kabul, Afghanistan
> RX: WinRadio G303e
> ANT: 200m Longwire/Randomwire
> ACC: Palstar MW-550P Mediumwave Preselector
>
> 9995 KOREA, NORTH, V. of Korea heard 19 Nov. at 1518 with
> AR pgm to the
> Middle East. The signal was S3 at best. I was quite
> surprised at the lack
> of strength, especially as it is supposed to be beamed to
> the ME.
>
> 9990 ISRAEL, Kol Israel, heard 19 Nov. at 1501 w/s/on in FS
> and news.
> English recordings of Simon Peres. Loud signal, but not
> quite S5. If I
> recall correctly, they were going to quit SW a few years
> back.
>
---[Start Commercial]---------------------
Order your WRTH 2008:
http://www.hard-core-dx.com/redirect2.php?id=wrth2008
---[End Commercial]-----------------------
________________________________________
Hard-Core-DX mailing list
Hard-Core-DX@xxxxxxxxxxxxxxxx
http://montreal.kotalampi.com/mailman/listinfo/hard-core-dx
http://www.hard-core-dx.com/
_______________________________________________
THE INFORMATION IN THIS ARTICLE IS FREE. It may be copied, distributed
and/or modified under the conditions set down in the Design Science License
published by Michael Stutz at
http://www.gnu.org/licenses/dsl.html