Re: [HCDX] the Grundig Eton G5: a major disappointment

["Paul" <format4nz@xxxxxxxxx>]

I did the same with the Kaito KA 1003 being also about 200 metres from the 
mast where six of our local MW stations reside.

Paul


----- Original Message ----- 
From: "Tudor Vedeanu" <tmvedeanu@xxxxxxxxx>
To: <hard-core-dx@xxxxxxxxxxxxxxxx>
Sent: Sunday, December 21, 2008 8:59 PM
Subject: Re: [HCDX] the Grundig Eton G5: a major disappointment


> Bogdan,
>
> I have an Eton E1 which works pretty well. I only succeeded to
> overload it once, when I was operating it 200 meters near the 400 kW
> Radio Iasi transmitter here in Romania.
>
> Tudor
>
> On Sun, Dec 21, 2008 at 1:16 AM, aurel chiochiu <acq@xxxxxxxxxxxx> wrote:
> > Is the Drake R8B along with the AOR, the Icom and the Degen the only 
> > options for LW DXing ? Is there anything even *SLIGHTLY* cheaper ? I 
> > would really like to hear at least 162 and 171 regularly... Now, 171 is 
> > badly covered by mixing products on the Eton G5...
> ---[Start Commercial]---------------------
>
> Order your WRTH 2008:
> http://www.hard-core-dx.com/redirect2.php?id=wrth2008
> ---[End Commercial]-----------------------
> ________________________________________
> Hard-Core-DX mailing list
> Hard-Core-DX@xxxxxxxxxxxxxxxx
> http://montreal.kotalampi.com/mailman/listinfo/hard-core-dx
> http://www.hard-core-dx.com/
> _______________________________________________
>
> THE INFORMATION IN THIS ARTICLE IS FREE. It may be copied, distributed
> and/or modified under the conditions set down in the Design Science 
> License
> published by Michael Stutz at
> http://www.gnu.org/licenses/dsl.html 

---[Start Commercial]---------------------

Order your WRTH 2008:
http://www.hard-core-dx.com/redirect2.php?id=wrth2008
---[End Commercial]-----------------------
________________________________________
Hard-Core-DX mailing list
Hard-Core-DX@xxxxxxxxxxxxxxxx
http://montreal.kotalampi.com/mailman/listinfo/hard-core-dx
http://www.hard-core-dx.com/
_______________________________________________

THE INFORMATION IN THIS ARTICLE IS FREE. It may be copied, distributed
and/or modified under the conditions set down in the Design Science License
published by Michael Stutz at
http://www.gnu.org/licenses/dsl.html