Re: receiver multicouplers

["Chuck Rippel" <crippel@xxxxxxxx>]

This message is sent by "Chuck Rippel" <crippel@xxxxxxxx>
to hard-core-dx@xxxxxxxxxxxxxxxx:

> This message is sent by steve@xxxxxx (Steve Byan)
> to hard-core-dx@xxxxxxxxxxxxxxxx:
> 
> >Does anyone have plans for a "Receiver
> >Coupler" or know where one can be purchased for a reasonable price? I don't
> >have the option of putting up more antennas....
> 
> Get a CU-1388 multicoupler from Fair Radio. Goes for $75, has 8 outputs.
> The disadvantage is that it uses type-C connectors, which are a bit hard to
> come by. You can fairly easily change them to your favorite type if you're
> handy with a soldering iron. Fair Radio is at (419) 223-2196.
> 
> Alternatively, ICE has a 4 output multicoupler for about $30. You need to
> feed it 12  volts, though, and it's IMD performance is not as good as the
> CU-1388. I don't recommend it if you live near a MW transmitter. ICE is at
> (800) 423-2666.
> 
> Regards,
> -Steve
> 
> 

I have a CU-1280 which I bought for $25 at a hamfest.  It uses BNC 
connectors with 1 in and 30 out.

Industrial Communications Engineers also makes a 1 in 4 out for a 
farily reasonable price.  Their number is:

(800) 423-2666
+++++++++++++++++++++++++++++++++++++++++++++++

Chuck Rippel
crippel@xxxxxxxx

+++++++++++++++++++++++++++++++++++++++++++++++
--
Redistribution of the material is not allowed without permission of
original poster or Kotanet Communications Ltd. Contributions to the
list are very welcome to hard-core-dx@xxxxxxxxxxxxxxxxx
For more information about hard-core-dx@xxxxxxxxxxxxxxxx email to
owner-hard-core-dx@xxxxxxxxxxxxxxxxx
--